FT995M-C002 Servo Motor 180° 95 kg.cm Metal Gear 12Vdc
Aluminum High-Torque Servo 180 Degree
Internal Reference:
SERVO.FT995M.C002
The FT995M-C002 servo motor is a 12V 180° high-torque servo with steel gears, an aluminum case and ball bearings. It delivers a peak stall torque of 95 kg.cm at 12V, with an operating voltage range of 6-12V.
FT995M-C002 Servo Motor 95 kg.cm: General Specification
Item | Specification |
Model | FT-995-C002 |
Product Name | 12V 95kg.cm 180° |
Storage Temperature Range | -30℃~80℃ |
Operating Temperature Range | -20℃~60℃ |
Size | A: 65mm, B: 30mm, C: 48mm |
Weight | 187.5g ± 1g |
Gear type | Steel |
Limit angle | NO limit |
Bearing | Ball bearings |
Horn gear spline | 15T / 7.6mm |
Gear Ratio | 1/399 |
Case | Aluminum |
Connector wire | 30 ± 0.5CM |
Motor | Core Motor |
FT995M-C002 12V Servo Motor: Electrical and Control Specification
Item | Specification |
Operating Voltage Range | 6-12V |
Idle current (at stopped) | 26mA @ 12V |
No load speed | 0.322 sec/60° (31RPM) @12V |
Running current | 2200mA @ 12V |
Peak stall torque | 95kg.cm @ 12V, 105kg.cm @ 13V |
Rated torque | 22.5kg.cm @ 12V |
Stall current | 9.8A @ 12V |
Command signal | Pulse Width Modulation (PWM) |
Control System Type | Digital comparator |
Pulse width range | 500~2500 μsec |
Stop position | 1500 μsec |
Running degree | 180±5° (at 500→2500μsec) |
Dead band width | ≤4 μsec |
Rotating direction | Counterclockwise (1500→2500 μsec) |
High Torque Servo Motor 95 kg.cm: Choosing the Right Servo
If you need a lower-torque servo, see the FT5835M servo motor 180° 35.5 kg.cm metal gear or the FT5325M servo motor 180° 25 kg.cm metal gear. For a smaller servo, see the FS5115M servo motor 180° 15.5 kg.cm metal gears. You can also see the servo motor mount brackets aluminum set, or browse all robotic servo motors.
Frequently Asked Questions
What is the peak stall torque of the FT995M-C002?
The peak stall torque is 95 kg.cm at 12V and 105 kg.cm at 13V.
What voltage does the FT995M-C002 use?
The operating voltage range is 6-12V.
What is the weight and size of the FT995M-C002?
The weight is 187.5g ± 1g, and the size is A: 65mm, B: 30mm, C: 48mm.
What gears and case does it have?
The gear type is steel with a gear ratio of 1/399, the case is aluminum, and the bearing is ball bearings.
What is the horn spline?
The horn gear spline is 15T / 7.6mm.
What are the operating temperatures?
The operating temperature range is -20℃~60℃, and the storage temperature range is -30℃~80℃.
Why Choose the FT995M-C002 Servo Motor
The FT995M-C002 servo motor gives you a 95 kg.cm high-torque 12V servo with steel gears, an aluminum case and ball bearings. If you are building a robotics project this term, RAM Electronics offers the FT995M-C002 servo motor in Egypt along with other servo motors. Contact us if you need help choosing the right servo for your project.