URETHANE Spray 400mL


Highly Resistant, Protective & Insulating Conformal Coating

400.00 EGP 400.0 EGP 400.00 EGP

400.00 EGP

Not Available For Sale

This combination does not exist.

Buy any 2 ECS Germany Sprays & Get 1 Free Plastic Spray

 Pick up from RAM Store
 Shipping: 2-3 Business Days

Internal Reference: SPRAY.ECS.URETHANE.400ML

URETHANE Spray 400mL - Highly Resistant, Protective and Insulating Conformal Coating


  • Highly Resistant, Protective, and Insulating Conformal Coating
  • URETHANE-CLEAR is a high-quality single-component polyurethane lacquer, particularly suitable for the electronic industry
  • It protects and insulates PC boards, electrical motors, transformers, electronic equipment, and components
  • It offers protection from damaging environmental conditions such as humidity, salty corrosive vapors, fungus, thermal and mechanical stress
  • URETHANE-CLEAR forms a hard, stable, flexible, non-conductive and wear-resistant film with excellent adherence, mainly used as a protection and sealing of printed circuits boards
  • It is used as a resistant, protective conformal coating for electric motors, transformers, and other equipment and components
  • Particularly suitable for preventing damage caused by moisture, corrosion, and chemical agents


Protection of printed circuit boards, components, wires, cables, etc. URETHANE CLEAR eliminates or prevents cree page current, corona effects, short circuits, or discharges. It is also suitable for corrosion protection of parts subjected to bad atmospheric conditions. 

Please note:

  1. First clean the surface. Shake the can well before first use.
  2. Apply a uniform layer maintaining a distance of approx. 30 cm. If required, apply a second layer after 24 hours.
  3. URETHANE CLEAR is dry to permit handling within 120 minutes (curing time may differ depending on conditions).
  4. After use, turn the can upside down and press the spray button several times. If the spray nozzle gets clogged, clean it using acetone.

Technical Data:

  • Appearance: Slightly yellowish
  • Specific gravity: 0,80 g/cm3
  • Drying time: Appr.. 2 hours at 20°C - dry to touch
  • In an oven: Appr. 24 hours at 60°C – totally cured
  • Temperature range: -40 – 130° C
  • Viscosity: 12 s (aerosol) (DIN 3211)
  • Protection: Against diluted acids and alkalis humid salty, salty vapors alcohol fungus, thermal and mechanical stress chlorinated solvents
  • Surface resistance: 2,5 x 1012 Ω
  • Resistivity: 5,1 x 1012 Ω
  • Dielectric strength: 82,9 kV/mm
  • Size: CAN 400mL

يوريثان سبراي (صنع في ألمانيا) هو مكون واحد عالي الجودة ورنيش البولي يوريثين ، مناسبة خاصة للصناعة الالكترونية. فهو يحمي ويعزل الوحات الالكترونية المطبوعة بصفة عامة والمحركات الكهربائية والمحولات الإلكترونية وكذلك المعدات الالكترونية. يوفر ايضا الحماية من الإضرار بالظروف البيئية مثل الرطوبة ، الأبخرة المالحة ، الفطريات كما يشكل اليوريثان سبراي مادة صلبة ومستقرة ومرنة وغير موصلة ومقاومة للظروف القاسية و تستخدم بشكل رئيسي كحماية للوحات الدوائر المطبوعة و يتم استخدامه كمقاومة ووقاية طلاء مثالي للمحركات الكهربائية والمحولات و المعدات والمكونات الأخرى. مناسبة خاصة لمنع الضرر الناجم عن الرطوبة والتآكل و العوامل الكيميائية