The TR-11 Arduino Advanced Starter Kit is a complete Arduino project box built for learners ready to move past basic LED-and-button exercises. It bundles an Arduino UNO R3 board with over 75 components — motors, an RFID module, an LCD screen, a gyroscope, and more — plus a CD of lessons and projects, in one free component box.
Package List
- 1x 400-point breadboard
- 1x USB Cable 0.5m
- 1x Arduino UNO R3 Board
- 1x Remote +IR Receiver
- 1x Protoshield + Mini breadboard
- 65x Jumper Wires
- 1x SG90 Servo Motor
- 1x DC Motor
- 1x RFID Module RC522
- 5x PN2222 NPN Transistors
- 5x BC557 PNP Transistors
- 5x BC547 NPN Transistors
- 2x LDR Sensor
- 5x 1N4001 Diodes
- 1x Stepper Motor
- 1x UNL2003 Motor driver board
- 1x 74HC595 MAX7219 Chip
- 1x L293D Chip
- 1x Relay Single Channel Module
- 1x HC-SR04 Ultrasonic Range Finder
- 1x LCD 1602 screen (2x16)
- 5x Blue LED
- 5x Green LED
- 5x Yellow LED
- 5x White LED
- 5x Red LED
- 1x RGB LED (Cathode)
- 1x 10k Potentiometer
- 1x Thermister (Temperature Sensor)
- 1x Piezo Buzzer
- 5x 22pF Capacitor
- 5x 0.1uF Capacitor
- 2x 50V 10uF Capacitor
- 2x 50V 100uF Capacitor
- 5x Switches
- 200Ω 330Ω 1kΩ 2kΩ 5.1kΩ 10kΩ 10Ω 100Ω 100kΩ 1mΩ x10
- 1x 9V Battery Connector
- 4x Female-Female Premium Wires
- 1x 8X8 Dot Matrix Display
- 1x 7-Segment Display (4-Digit)
- 1x 7-Segment Display (1-Digit)
- 1x MPU6050 Gyroscope Module
- 1x Joystick Module
- 1x SMD Material box (10 lattice)
- 1x 40 Pin Header
- CD With projects & Lessons for training
Why Choose This Arduino Kit?
- One box covers motors, sensors, displays, and communication modules (RFID) — no need to buy components separately across multiple orders.
- Includes an Arduino UNO Rev3, so it works as a complete starting point on its own.
- The included CD of lessons and projects gives structured guidance rather than leaving you to figure out wiring from scratch.
- Covers a wide skill range in one kit — from basic LED circuits up to motor control, RFID, and gyroscope-based projects — so it grows with you as you learn.
- Prefer a smaller, lighter kit to start with? The TR-02 Arduino Basic Starter Kit covers the fundamentals at a lower cost.
Common Uses for This Arduino Kit
- Structured Arduino courses and workshops that need one consistent kit for every student.
- Multi-project learning — motor control, RFID access systems, sensor dashboards, and display projects, all from the same box.
- University and school electronics coursework that goes beyond a single introductory project.
- Personal, self-paced learning using the included CD lessons as a curriculum.
- Browse RAM Electronics' full range of Arduino boards for individual components or replacements.
Frequently Asked Questions
What's the difference between this kit and a basic Arduino starter kit?
The TR-11 includes significantly more components — motors, an RFID module, a gyroscope, multiple display types — aimed at intermediate-to-advanced projects, while a basic kit typically covers just LEDs, resistors, and simple sensors for absolute beginners.
Do I need to buy an Arduino board separately?
No — the kit includes a full Arduino UNO R3 board, along with a breadboard, jumper wires, and USB cable, so it's ready to use out of the box.
Is this kit suitable for someone with no prior Arduino experience?
It's aimed at learners ready to go beyond the absolute basics — some familiarity with simple circuits (LEDs, resistors) helps, though the included CD lessons are designed to guide you through more advanced projects step by step.
What kind of projects can I build with the RFID module and gyroscope?
The included module is built on NXP's MFRC522 chip, a 13.56MHz contactless reader/writer IC supporting the ISO/IEC 14443 A and MIFARE standards — commonly used for access-control or tag-reading projects (like a simple door-unlock system). The gyroscope module uses InvenSense's MPU-6050, a combined 6-axis motion-tracking device (3-axis gyroscope + 3-axis accelerometer) commonly used for motion-sensing projects like tilt detection or simple balancing robots.
Ready to move beyond basic Arduino projects? Shop the TR-11 Arduino Advanced Starter Kit at RAM Electronics — 75+ components, an Arduino UNO R3 board, and a full lesson CD in one box.