Power Bank Module With USB Quick Charge 3.0 - PD3.0
Internal Reference:
KIT.BANK.QUICK
Specifications:
- Input1(micro): 5V/3A
- Input2(type-c): 5V3A 9V/2A 12V/1.5A
- Output1: 5V/3A
- Output2: 5V/3A 9V/2A 12V/1.5A
- Power: 18W(MAX) if your phone charging more than 18W, can't use the Quick Charging
Features:
- Any one port supports fast charging
- Output quick charge protocol
- Support QC3.0 QC2.0
- Support the FCP
- Support PE2.0 PE1.1
- Support the SFCP
- BC1.2 module
- BC1.2 DCP mode is supported
- Support phone, Samsung Large current charging mode recognition
The protection mechanism:
- Input overvoltage/overcurrent protection
- Output overcurrent/short circuit protection
- Charging timeout/overvoltage/overcurrent protection
- Temperature protection
Note:
- Do not connect the positive and negative terminals backward, otherwise, it will burn the circuit board
- After putting in the battery must be charged for this power bank activation, if not, won't have the output
Your Dynamic Snippet will be displayed here...
This message is displayed because youy did not provide both a filter and a template to use.