FNIRSI® 2C53T 50MHz 250MS/s Handheld 3in1 Oscilloscope Multimeter Signal Generator
Product Description
The FNIRSI® 2C53T is a multifunctional 3-in-1 handheld electronic testing instrument that combines a dual-channel digital oscilloscope, a True RMS digital multimeter, and a DDS function signal generator in one compact portable device. Designed for electronic maintenance technicians, engineers, electronics students, and hobbyists, it provides essential waveform analysis, electrical measurement, and signal generation capabilities.
The integrated dual-channel oscilloscope features a 50MHz analog bandwidth and a maximum real-time sampling rate of 250MSa/s, allowing users to observe and analyze two electronic signals simultaneously. With a storage depth of 1Kpts, adjustable vertical sensitivity from 10mV/div to 10V/div, and multiple trigger modes, it supports waveform acquisition and analysis for various electronic testing applications.
The oscilloscope also features advanced waveform analysis functions, including mathematical operations, cursor measurements, persistence mode, and XY display mode. Its FFT function provides an approximate representation of signal frequency components, while the infinite afterglow function helps visualize waveform variations over time. Waveform screenshots can be saved directly on the device and exported to a computer through the USB Type-C interface.
The integrated 4.5-digit, 19,999-count True RMS digital multimeter supports AC/DC voltage and current measurements, resistance, capacitance, and temperature measurements, as well as diode and continuity testing. This provides a comprehensive range of electrical measurement functions in the same instrument.
Additionally, the built-in DDS signal generator supports 13 waveform types with an adjustable output frequency from 0 to 50kHz, output amplitude from 0 to 3V, and duty cycle adjustment from 0 to 100%. Its 1Hz frequency adjustment step allows convenient signal configuration for electronic circuit testing.
Featuring a 2.8-inch HD color LCD display with a 320 × 240 resolution, FPGA + MCU + ADC hardware architecture, and an integrated high-voltage protection module, the FNIRSI 2C53T provides a practical combination of measurement and signal analysis capabilities.
Powered by a built-in 3000mAh rechargeable lithium battery, the device offers a standby time of up to 6 hours under the manufacturer's stated laboratory theoretical maximum conditions. Its compact dimensions of 167 × 89 × 35mm and weight of approximately 300g make it suitable for portable electronic testing, maintenance, and troubleshooting.
Key Features
- 3-in-1 Multifunctional Design: Combines a dual-channel digital oscilloscope, True RMS digital multimeter, and DDS function signal generator.
- Dual-Channel Oscilloscope: Allows simultaneous observation and comparison of two electronic signals.
- 50MHz Analog Bandwidth: Provides 50MHz bandwidth for each oscilloscope channel.
- 250MSa/s Sampling Rate: Supports high-speed real-time waveform acquisition.
- 1Kpts Storage Depth: Provides waveform record depth of 1Kpts.
- Adjustable Vertical Sensitivity: Supports 10mV/div to 10V/div with a 1X probe setting.
- Multiple Trigger Modes: Supports AUTO, Normal, and Single trigger modes.
- Rising and Falling Edge Triggering: Provides flexible waveform acquisition.
- 20MHz Bandwidth Limit: Not specified for this model; no separate bandwidth-limit specification is claimed.
- Advanced Waveform Analysis: Supports eight basic mathematical operations and FFT analysis.
- Cursor Measurement: Allows waveform parameter measurements using cursor functions.
- Persistence Mode: Supports waveform persistence settings of OFF, 500ms, 1s, and Infinite.
- XY and Roll Display Modes: Provides additional waveform visualization options.
- Infinite Afterglow: Helps visualize waveform variations and signal persistence.
- Waveform Screenshot Storage: Allows users to save waveform screenshots directly on the instrument.
- USB Type-C Data Export: Supports transferring saved waveform images to a computer.
- 19,999-Count True RMS Multimeter: Features a 4.5-digit display for electrical measurements.
- Comprehensive Multimeter Functions: Measures AC/DC voltage, AC/DC current, resistance, capacitance, and temperature, with diode and continuity testing.
- 13 DDS Waveform Types: Generates multiple standard waveforms for electronic circuit testing.
- 50kHz Signal Generator: Provides an adjustable output frequency from 0 to 50kHz.
- Adjustable Signal Output: Supports output amplitude from 0 to 3V and duty cycle from 0 to 100%.
- 1Hz Frequency Step: Allows fine frequency adjustment.
- FPGA + MCU + ADC Architecture: Integrates FPGA, MCU, and ADC hardware.
- High-Voltage Protection: Incorporates a built-in high-voltage protection module.
- 3000mAh Rechargeable Battery: Provides portable battery-powered operation with up to 6 hours of standby time under the manufacturer's stated conditions.
- Compact Handheld Design: Measures 167 × 89 × 35mm and weighs approximately 300g.
Technical Specifications
Oscilloscope Specifications
| Parameter | Specification |
|---|---|
| Number of Channels | 2 Channels |
| Analog Bandwidth | 50MHz |
| Channel Bandwidth | 50MHz per Channel |
| Maximum Sampling Rate | 250MSa/s |
| Storage Depth | 1Kpts |
| Input Impedance | 1MΩ |
| Timebase Range | 10ns – 20s |
| Vertical Sensitivity | 10mV/div – 10V/div (1X) |
| Maximum Measured Voltage | ±400V |
| Trigger Modes | AUTO / Normal / Single |
| Trigger Types | Rising Edge / Falling Edge |
| Display Modes | Y-T / Rolling / X-Y |
| Coupling | AC / DC |
| Persistence Settings | OFF / 500ms / 1s / Infinite |
| Mathematical Operations | 8 Basic Operations + FFT |
| Cursor Measurement | Supported |
| Infinite Afterglow | Supported |
| Waveform Screenshot Storage | Supported |
| Waveform Image Export | Supported |
Digital Multimeter Specifications
| Parameter | Specification |
|---|---|
| Display Type | 4.5-Digit |
| Display Count | 19,999 Counts |
| Measurement Type | True RMS |
| DC Voltage Ranges | 1.9999V / 19.999V / 199.99V / 1000V |
| AC Voltage Ranges | 1.9999V / 19.999V / 199.99V / 750.0V |
| DC Current Ranges | 19.999mA / 199.99mA / 1.9999A / 9.999A |
| AC Current Ranges | 19.999mA / 199.99mA / 1.9999A / 9.999A |
| Resistance Ranges | 199.99Ω / 1.9999KΩ / 19.999KΩ / 199.99KΩ / 1.9999MΩ / 19.999MΩ |
| Capacitance Ranges | 9.999nF / 99.99nF / 999.9nF / 9.999µF / 99.99µF / 999.9µF / 9.999mF / 99.99mF |
| Temperature Range | -55°C to 1300°C / -67°F to 2372°F |
| Diode Test | Supported |
| Continuity Test | Supported |
DDS Signal Generator Specifications
| Parameter | Specification |
|---|---|
| Number of Waveform Types | 13 |
| Output Frequency Range | 0 – 50kHz |
| Frequency Adjustment Step | 1Hz |
| Output Amplitude | 0 – 3V |
| Output Duty Cycle | 0 – 100% |
| Frequency Adjustment | Adjustable |
| Amplitude Adjustment | Adjustable |
| Duty Cycle Adjustment | Adjustable |
Supported Signal Waveforms
- Sine Wave
- Rectangular Wave
- Sawtooth Wave
- Half Wave
- Full Wave
- Positive Step Wave
- Reverse Step Wave
- Exponential Rise
- Exponential Fall
- DC Signal
- Multi-Audio
- Sinker Pulse
- Lorentz Wave
General Specifications
| Parameter | Specification |
|---|---|
| Display | 2.8-inch HD Color LCD |
| Display Resolution | 320 × 240 Pixels |
| Hardware Architecture | FPGA + MCU + ADC |
| Battery Type | Rechargeable Lithium Battery |
| Battery Capacity | 3000mAh |
| Standby Time | Up to 6 Hours (Laboratory Theoretical Maximum) |
| Charging Interface | USB Type-C |
| Charging Input | 5V / 1A |
| Supported Languages | Chinese / English |
| Dimensions | 167 × 89 × 35mm |
| Weight | Approximately 300g |
Applications
The FNIRSI 2C53T integrates oscilloscope, multimeter, and signal generator functions, making it suitable for various electronic testing and maintenance applications:
- Electronic Circuit Testing: Observe and analyze electrical signals using the dual-channel digital oscilloscope.
- Electronic Equipment Maintenance: Diagnose waveform abnormalities and troubleshoot electronic equipment.
- Voltage and Current Measurements: Measure AC/DC voltage and current using the integrated True RMS digital multimeter.
- Electronic Component Testing: Measure resistance and capacitance and perform diode and continuity tests.
- Temperature Measurements: Measure temperature within the specified range using the multimeter function.
- Signal Generation and Testing: Generate different waveform types to test electronic circuits and evaluate their responses.
- Waveform Analysis: Examine signal characteristics using cursor measurements, mathematical operations, persistence, and FFT functions.
- Phase and Signal Comparison: Use XY display mode to compare two signals and examine their relationships.
- Electronic Development: Support circuit prototyping, signal testing, and electronic research activities.
- Educational Laboratories: Provide a multifunctional instrument for electronics experiments and practical training.
- Field Maintenance and Repair: Use the compact handheld design and rechargeable battery for portable electronic testing.
Package Contents
The FNIRSI 2C53T is available in different package configurations according to the selected variant.
Standard Package
- 1 × FNIRSI 2C53T Oscilloscope
- 1 × 10X P6100 Oscilloscope Probe
- 1 × Alligator Clip Probe
- 1 × Multimeter Probe
- 1 × Charging Cable
- 1 × Storage Bag
- 1 × User Manual
- 1 × Packing Box
Full Set Package
- 1 × FNIRSI 2C53T Oscilloscope
- 2 × 10X P6100 Oscilloscope Probes
- 1 × Alligator Clip Probe
- 1 × Multimeter Probe
- 1 × Charging Cable
- 1 × Storage Bag
- 1 × User Manual
- 1 × Packing Box
Frequently Asked Questions (FAQ)
1. What functions does the FNIRSI 2C53T provide?
The FNIRSI 2C53T is a 3-in-1 electronic testing instrument that combines a dual-channel digital oscilloscope, a 19,999-count True RMS digital multimeter, and a DDS signal generator.
2. What is the bandwidth and sampling rate of the FNIRSI 2C53T?
It features a 50MHz analog bandwidth per channel and a maximum real-time sampling rate of 250MSa/s.
3. Does the FNIRSI 2C53T support two-channel waveform measurements?
Yes. It features two independent oscilloscope input channels, allowing users to observe and compare two electronic signals simultaneously.
4. What measurements can the built-in digital multimeter perform?
The integrated 4.5-digit True RMS multimeter supports AC/DC voltage, AC/DC current, resistance, capacitance, and temperature measurements, as well as diode and continuity testing.
5. What is the maximum frequency of the built-in signal generator?
The DDS signal generator supports an adjustable output frequency from 0 to 50kHz, with a frequency adjustment step of 1Hz.
6. How many waveform types does the FNIRSI 2C53T signal generator support?
It supports 13 waveform types, including sine, rectangular, sawtooth, half-wave, full-wave, step, exponential, DC, multi-audio, sinker pulse, and Lorentz waveforms.
7. Does the FNIRSI 2C53T support FFT analysis and waveform storage?
Yes. It supports FFT analysis, mathematical waveform operations, cursor measurements, persistence, and XY display mode. Users can also save waveform screenshots and export them to a computer through the USB Type-C interface.
8. What is the battery capacity and operating time of the FNIRSI 2C53T?
It features a built-in 3000mAh rechargeable lithium battery. The manufacturer specifies a standby time of up to 6 hours under laboratory theoretical maximum conditions.