4S 30A 14.8V Li-ion Lithium 18650 Battery BMS Packs PCB Protection Board Balance Integrated Circuits
Specification:
- Overcharge detection voltage: 4.28+ 0.05 V
- Overcharging voltage: 4.095-4.195V
- Over-discharge voltage: 2.55±0.08
- Overcharge detection delay time 0.1s
- Temperature range -30~80
- Short circuit detection delay time: 100ms
- Over-current detection delay time: 500 ms
- Balanced current: 60mA
- Working current: 30A
- Overcurrent: 60A
- Short circuit protection function: there is, a disconnect the load can be self-recovery.
- Size:45x56mm
Main function:
Overcharge protection, over-discharge protection function, short circuit protection function, over current protection function, balance.
Important Cautions:
- Strictly according to the diagram wiring - do not make short circuit.
- After the wire is connected, it needs to charge the batteries first, then have output.
- When the battery is connected in series with 5 groups, please ensure that the voltage of each battery is the same. If not the same, please fill in each set of batteries and then use them.
- Do not mix the good battery and the bad battery.
- It will be better if the capacity of the battery's internal resistance is closer.
Your Dynamic Snippet will be displayed here...
This message is displayed because youy did not provide both a filter and a template to use.