TMC2209 V2.0 Stepper Motor Driver - MKS

325.00 EGP 325.0 EGP 325.00 EGP

325.00 EGP

Not Available For Sale

This combination does not exist.

 Pick up from RAM Store
 Shipping: 2-3 Business Days

Internal Reference: KIT.TMC2209.DRIVER


TMC2209 has all functions of TMC2208, and can completely replace tmc2208. At the same time, TMC2209 has better heat dissipation, supports a bigger current, and supports a sensorless-homing function. 


  • Ultra-quiet
  • A large heat sink for good heat dissipation
  • Support sensorless-homing function.
  • Support UART mode by setting jumper caps instead of welding on mks gen_l V2.0,skr1.3/1.4,mks sgen_l.


  • Pay attention to the connection direction, do not reverse it.
  • The motor direction is opposite to that of A4988 and DRV8825, please adjust the firmware or adjust the motor wiring if you want to change A4988.
  • Dir/step mode used in the printer control board, please pay attention to setting the jumper cap MS1 MS2.


  • Default current: 0.88A
  • Recommend current: 1.72A (at most)
  • Max current: 2A
  • Logic voltage: 3.3V/5V
  • Input voltage: 5.5 - 28V
  • Microstep: Up to 1/256
  • Mode:
    • DIR/STEP
    • UART