High Speed Closed Loop Stepper Motor 12N.M - NEMA-34 - Complete Axe
Holding Torque: 12 N.m
Current /phase: 6 A
Original Leadshine Product
Motor Model: CS-M234120 + Driver Model: CS-D1008 + Encoder 5m Cable + Motor 5m Cable
Internal Reference:
CS.AXE.12NM
System Include:
- Motor Model: CS-M234120 X1
- Driver Model: CS-D1008 X1
- Encoder 5m Cable X1
- Motor 5m Cable X1
Motor Features
- 2 phase, NEMA 34 frame size
- 158 mm long
- 6 A phase current
- 12 N.m holding torque
- 14 mm shaft size
- Integrated 1,000 line (4,000 count/revolution) quadrature rotary encoder
- High precision, low motor heating, and low vibration
- Build with high quality materials including bearings and shaft made by Japanese manufacturers.
- This closed loop stepper motor can be adopted in many industrial applications with excellent performance such as high precision, low motor heating, and low vibration.
Motor Parameters:
- Model: CS-M234120
- Frame Size: NEMA 34
- Phase: 2
- Step Angle: 1.8°
- Accuracy: ±0.9°
- Length: 158 mm
- Number of Wires: 4
- Holding Torque: 12N.m
- Phase Current: 6 A/Phase
- Encoder Resolution: 1000 Line (4000 counts/per revolution)
- Voltage: 4.5 V
- Resistance: 0.75 Ω
- Inductance: 5.3 mH
- Rotor Inertia: 2.94 kg-cm2 (0.04163 oz-in-sec2 )
- Shaft Size: 14 mm (0.551 inch)
- Shaft Type: Single
- Weight: 4.7 kg (10.35 lb)
- Insolation Class: B
- Insolation resistance: Min 100 MΩ,500 VDC)
- Operating Temperature: -10 - 50°C (14 - 122°F)
- Temperature Rise (Max): 80K
- Radial Play: Max 0.02 mm with 450g load
- Axial Play: Max 0.08 mm with 900g load
Driver Features
- Step & direction or CW/CCW control modes
- Supply voltage of 20-80 VAC or 30-100 VDC, maximum output current of 8.0A
- Powering 2-phase stepper motor of NEMA 23, 24, 34, or 42 with 1000-line encoder
- Closed-loop, eliminates loss of steps
- No Tuning & No hunting
- No overshooting
- No torque margin
- Reduced motor heating and more efficient
- Smooth motion and super-low motor noise
- CE certified and RoHS compliant
- CS-D1008 Driver can close the position loop between the motor and drive and therefore eliminate the loss of step problem in an open loop system.
- CS-D1008 adopted closed loop stepper system can eliminate loss of step, make real-time position error correction, and use 100% available torque of the driven stepper motor. It can also power the driven stepper motor with reduced heating, lower noise, low vibration, …
Download
Your Dynamic Snippet will be displayed here...
This message is displayed because youy did not provide both a filter and a template to use.