Specification:
- Temperature measurement and control range: -20℃~+80℃
- Humidity temperature range: 0%RH~+100%RH
- Accuracy:±1°C 0.1%RH
- Working voltage: 220V
- Load voltage: 2200W
- Relay output contact capacity: 10A/240VAC
- Sensor: integrated sensor, cable length 1 meter
- Shell material: gray ABS flame-retardant plastic shell
Instructions for operation:
- Set startup temperature/humidity: Press the ''up'' button once to display the starting temperature(humidity). Long press the ''up'' button for about 3 seconds, The required temperature(humidity) can be set by the up and down keys
- Set the stop temperature/humidity: Press the ''down'' button once to display the stop temperature(humidity). Long press the button for about 3 seconds and the stop temperature(humidity) number flashes. The required temperature(humidity) can be set by the up and down keys
- Temperature/humidity correction: Press ''up'' and ''down buttons at the same time.
Your Dynamic Snippet will be displayed here...
This message is displayed because youy did not provide both a filter and a template to use.