8 Output Relay Module Work on 5V Signal With Additional IR Remote Control

Features

• Dual trigger design, using a dedicated bidirectional driver IC design
• Strong anti-interference ability, using diode continuous current protection
• The contact part of the relay adopts double-sided thick wiring, which can pass through a large current, safe and reliable
• Using high-quality relays
• Both input and output adopt 5.08mm high-quality wiring terminals, making wiring more convenient and suitable for PLC control
• The input terminal can be set arbitrarily high and low-level triggers, the control method is more flexible
• Each relay has a pull-in indicator light, and the working status of the relay is clear at a glance
• Each relay output leads to two groups of normally open and normally closed
• With fixing screw holes for easy installation.

Specifications

• Working voltage: 5V
• Dimensions: 133 x 55 x 19 mm

The product wiring is as follows:

1. VCC: input power supply terminal
2. GND: Input power terminal ground terminal
3. CTR1-CTR8 is the signal input trigger terminal, which is valid in any mode (just set by jumper)
4. Use of the remote control: only the numeric keys work, the 1-8 keys correspond to the corresponding 1-8 channels of the relay. When pressed once, the relay works, and when pressed again, the relay turns off. When the 0 button is pressed, all work is performed, and when the 9 button is pressed, all are disconnected.