Complete Functions - Strong Performance
The constant voltage and constant current programmable control power supply module put the collection of analog integration and digital control functions in one. Its adjustable output voltage range is 0–50.00V, step by 0.01V. Its adjustable output current range is 0–15.00A, step by 0.01A.
Items that can be displayed include a precision voltmeter and ammeter, preset Voltage, output Voltage, preset Current Limit, output Current, output Power and Data Group selection parameters and menus. The unit offers a technologically advanced design presented in a very compact size that is both visually appealing and easy to operate.
Technical parameters
- Model: DPS5015-USB-BT
- PC connection via USB and Android connection via Bluetooth
- Input voltage range: 6.00- 60.00V
- Output voltage range: 0V-50.00V
- Output current: 0-15.00A
- Output voltage resolution: 0.01V
- Output current resolution: 0.01A
- Output power range: 00.00- 750W
- Working mode: output voltage< input voltage/1.1
- Product Weight: about 222g
- Open size: 71mm*39mm
- Output Voltage accuracy: ± (0.5% + 3 digit)
- Output Current accuracy: ± (0.5% + 5 digits)
- Product Dimension: 79*43*41(mm) (L*W*H)
- Power module size: 93*71*41(mm) (L*W*H)
Data Setting Interface
Set the output Voltage and output Current Limit via the Main Interface:
Press V/↑ key to enter the Voltage setting mode. The Voltage setting numeric value will be highlighted by the cursor. Press the rotary control to place the cursor at the required character of the numerical value you wish to change. Further presses of the rotary control will cycle through the characters available. Turning the rotary control clockwise increases the value and anticlockwise decreases the value. Press V/↑ key again to exit. Alternatively, after 30 seconds of inactivity the setting mode will exit automatically. Press A/↓ key to set the output Current Limit using the same procedure.
Set the output Voltage and output Current Limit via the Data Setting Interface:
On the main interface press the SET key to enter the Data Setting Interface. In the Data Setting Interface press V/↑ key or A/↓ key to step up or down through the menu options to select U-SET (Voltage) or I-SET (Current Limit), and then set the output Voltage and output Current Limit in the same way as used in the main interface. Press the SET key to return to the menu options and press the SET key again to exit.