DMT80480T070-18WTZ7 LCD 7" DWIN - Industrial Grade شاشة تاتش باللمس - صناعي - قابلة للبرمجة سريال ماركة DWIN مقاس LCD 7"

Product Description

The DWIN DMT80480T070_18WTZ7 is a 7-inch intelligent HMI display module designed for industrial automation, embedded control systems, and electronic equipment requiring a graphical touch interface.

Featuring an 800 × 480 pixel TFT LCD with 65K colors, this display provides a clear graphical interface for monitoring system information, displaying operating parameters, and controlling connected equipment. It incorporates a 4-wire resistive touchscreen for interactive operation and runs DWIN's DGUS system software platform.

The module supports RS232 and RS485 serial communication, allowing it to interface with compatible controllers and industrial equipment. It also features an SD/SDHC card slot for downloading pictures, fonts, and configuration files, along with 224MB of picture storage, a built-in real-time clock (RTC), and an integrated buzzer.

Designed for panel installation, the display features an ABS + PC engineering plastic enclosure, front-panel IP65 protection, and a wide 6–42V DC input range with reverse-polarity protection.

Specifications

Technical Information

1. Display and Resistive Touchscreen

The module features a 7-inch TFT LCD with an 800 × 480 pixel resolution and 65K colors using a 16-bit RGB565 color format.

The integrated 4-wire resistive touchscreen provides interactive control with a specified touch inaccuracy of ±0.5%.

The display supports 90° rotation through configuration, changing the effective resolution to 480 × 800 pixels.

Its LED backlight provides 300-nit brightness with 64 adjustment levels and a specified lifetime of at least 30,000 hours until brightness decreases to half its initial value.

2. DWIN DGUS Software Platform

The display operates using DWIN's DGUS system software, which allows developers to create graphical user interfaces for embedded and industrial applications.

The module provides the following memory resources:

• Register space: 256 bytes.
• Variable storage: 56KB.
• Fonts and icons storage: 32MB.
• Picture storage: 224MB, supporting up to 278 full-screen pictures.

3. RS232 and RS485 Serial Communication

The DMT80480T070_18WT supports both RS232 and RS485 serial communication through a 6-pin, 3.81mm Phoenix connector.

The communication specifications are:

• Minimum baud rate: 1200 bps.
• Typical baud rate: 115200 bps.
• Maximum baud rate: 230400 bps.
• Communication format: N81.

These interfaces allow the display to communicate with compatible PLCs, controllers, and embedded systems.

Important: The supplied datasheet specifies RS232 and RS485 interfaces. It does not identify a TTL/CMOS interface for this model. Check the actual hardware and connector documentation before connecting it to a microcontroller's TTL-level UART.

4. SD Card Interface

The module includes an SD/SDHC card slot supporting the FAT32 file system.

The SD card can be used to download and upgrade:

• Display pictures.
• Fonts.
• Configuration files.

This provides a convenient way to update graphical interface resources without requiring a direct computer connection for every update.

5. Power Supply and Protection

The display supports a wide DC input voltage range, making it suitable for different industrial power systems.

• Input voltage: 6–42V DC.
• Power consumption: 4.8W.
• Typical operating point: 12V, 400mA.
• Reverse-polarity protection: Supported.

Use a regulated DC power supply within the manufacturer's specified input range.

6. Front-Panel Protection and Installation

The display features an IP65-rated front panel, providing protection against dust and water jets when correctly installed.

Its ABS + PC engineering plastic enclosure is designed for panel mounting.

The manufacturer specifies:

• Overall dimensions: 210.3 × 149.75 × 26.0 mm.
• Panel cutout: 198.1 × 137.6 mm.
• Installation depth: 20.85 mm, including the 6-pin Phoenix connector.

A waterproof rubber gasket and mounting buckles are included.

7. RTC and Buzzer

The module includes a real-time clock (RTC) with a specified accuracy of 1 second per 24 hours at 25°C.

An integrated buzzer provides audible prompts when an effective touch button is clicked, supporting user feedback in interactive applications.

Features

• 7-Inch TFT Display: 800 × 480 resolution with 65K colors.
• Resistive Touchscreen: 4-wire touch technology with ±0.5% specified inaccuracy.
• DWIN DGUS Platform: Supports graphical interface development for embedded and industrial applications.
• RS232 and RS485 Interfaces: Serial communication with compatible controllers and industrial equipment.
• Wide DC Input: Operates from 6–42V DC with reverse-polarity protection.
• Front-Panel IP65 Protection: Designed for installation in industrial panels and equipment.
• 300-Nit Brightness: LED backlight with 64 adjustment levels.
• Long Backlight Lifetime: Rated for at least 30,000 hours to half brightness.
• Large Picture Storage: 224MB storage supporting up to 278 full-screen pictures.
• SD/SDHC Card Support: FAT32-compatible card interface for downloading pictures, fonts, and configuration files.
• Built-in RTC: Real-time clock with specified accuracy of 1 second per 24 hours.
• Integrated Buzzer: Audible feedback when effective touch buttons are clicked.
• Industrial Panel Mounting: Includes a waterproof rubber gasket and mounting buckles.

Applications

• Industrial automation and control panels.
• PLC monitoring and control systems.
• Factory machinery and production equipment.
• Industrial monitoring and data visualization.
• Power supply and electrical equipment interfaces.
• Building automation and control systems.
• Embedded control systems.
• Custom industrial equipment requiring a graphical touch interface.

Frequently Asked Questions (FAQ)

1. What is the resolution of the DWIN DMT80480T070_18WTZ7?

According to the supplied datasheet for DMT80480T070_18WT, it features a 7-inch TFT LCD with an 800 × 480 pixel resolution and 65K colors. It also supports 90° display rotation.

2. Does this display support touch input?

Yes. The datasheet specifies an integrated 4-wire resistive touchscreen with a touch inaccuracy of ±0.5%.

3. What power supply does this HMI display require?

It supports a wide input range of 6–42V DC. Its specified power consumption is 4.8W, equivalent to approximately 400mA at 12V.

4. Does the display support RS232 and RS485 communication?

Yes. The datasheet specifies both RS232 and RS485 serial communication through a 6-pin, 3.81mm Phoenix connector.

5. Is the DWIN display waterproof?

The front panel has an IP65 protection rating. This applies to the front panel when correctly installed with the supplied waterproof gasket. The rear enclosure should not be considered fully IP65-protected.

6. How can I upload pictures and configuration files to the display?

The module includes an SD/SDHC card slot supporting FAT32. It can be used to download and upgrade pictures, fonts, and configuration files.

7. Does this HMI display include a real-time clock?

Yes. It includes a built-in RTC with a specified accuracy of 1 second per 24 hours at 25°C. It also features a buzzer for audible touch-button feedback.

8. What are the mounting dimensions of this display?

The overall dimensions are 210.3 × 149.75 × 26.0 mm, and the specified panel cutout size is 198.1 × 137.6 mm. The installation depth is 20.85 mm, including the Phoenix connector. A waterproof rubber gasket and mounting buckles are included.

Download

• LCD datasheet
• Software
• Datasheet and Arduino Connection
• For Arduino Code (DGUS) - (Click Here)