3S 11.1V 25A 18650 Li-ion Lithium Battery BMS Protection PCB Board With Balance Function.
Specification:
- Overvoltage range: 4.25 ~ 4.35v ± 0.05v
- Over-discharge voltage range: 2.3 ~ 3.0v±0.05v
- Maximum operating current: 0 ~ 25A
- Maximum transient current: 34 ~ 40A
- Quiescent current: less than 30uA
- Internal resistance: less than 100m
- Working temperature: 40 +50 C
- Effective life: more than 30000h
- Short circuit protection: Yes, delayed self-recovery
- Size: 56mm x 45mm x 1.2mm (LxWxH)
Important Cautions:
- Strictly according to the diagram wiring - do not make short circuit.
- After the wire is connected, it needs to charge the batteries first, then have output.
- When the battery is connected in series with 5 groups, please ensure that the voltage of each battery is the same. If not the same, please fill in each set of batteries and then use them.
- Do not mix the good battery and the bad battery.
- It will be better if the capacity of the battery's internal resistance is closer.
Your Dynamic Snippet will be displayed here...
This message is displayed because youy did not provide both a filter and a template to use.