A raspberry pi camera case looks like a simple accessory, but getting the wrong one is one of the most common mistakes in Raspberry Pi camera projects. Raspberry Pi has released several camera modules over the years — V1, V2, V3, the HQ Camera, and the AI Camera — and each uses a different sensor, and in some cases a different board thickness.
A case built for one won't necessarily fit another. This guide breaks down exactly which cameras this specific acrylic case supports, which ones it doesn't, and what you'll need to complete your setup.
This case is a third-party accessory, not an official Raspberry Pi Holdings product — it's built to fit the official Raspberry Pi Camera Module V2's board dimensions, but it isn't manufactured or endorsed by Raspberry Pi itself.
View the Raspberry Pi Camera Clear Acrylic Case
Why Your Raspberry Pi Camera Needs a Case
Raspberry Pi camera boards ship as bare, exposed circuit boards with no protective housing at all. That creates a few practical risks worth taking seriously before mounting a camera in any real project:
- Physical damage: the board's edges and solder points are exposed to knocks, drops, or anything brushing against them
- Dust and debris: an open board sitting in a workshop, robotics enclosure, or outdoor housing collects dust that can interfere with the lens
- Accidental shorts: any conductive object touching the exposed underside of the board risks a short circuit
- Lens misalignment: without a fixed housing, the lens can shift out of position if the board gets bumped, especially in projects that move (robots, drones, handheld builds)
A clear acrylic case addresses all four issues while keeping the board fully visible — useful if you ever need to check wiring or troubleshoot without disassembling anything.
Which Raspberry Pi Cameras Fit This Case?
Raspberry Pi's camera lineup shares more in common mechanically than people often assume — but sensor generation and board thickness still make a real difference. Here's exactly where this case stands:
Camera Module | Fits This Case? | Why |
Raspberry Pi Camera Module V2 (Official, 8MP, IMX219) | ✅ Yes | The case is explicitly designed for this camera's board dimensions |
Generic/compatible 5MP camera boards | ✅ Yes | Shares the same 25×24mm board footprint as the V2 |
Raspberry Pi Camera Module V3 | ⚠️ Possibly, tight fit | V3 uses the same PCB size and mounting holes as V2, but is several millimeters taller due to its autofocus mechanism — it may not close properly in a case sized for V2's slimmer profile |
Raspberry Pi HQ Camera | ❌ No | A significantly larger board with a different tripod-mount design |
Raspberry Pi AI Camera | ❌ No | Shares the V2/V3 board footprint but may face the same thickness issue as V3 |
If you already own a V2 camera or a generic 5MP board, this case is a direct, confirmed fit. If you're using a V3, HQ, or AI Camera, check the height clearance carefully before assuming it will close — or look for a case designed specifically for that model instead.
What's Included With This Raspberry Pi Camera Case (And What's Not)
To avoid any confusion at checkout, here's exactly what comes in the box:
- Included: the clear acrylic top cover
- Included: the clear acrylic base plate
- Not included: the camera module itself — this is a case only, and a compatible V2 or 5MP camera must be purchased separately
- Not confirmed: mounting screws are not listed in the current product description — contact our sales team to confirm before assuming they're included
Order the Raspberry Pi Camera Clear Acrylic Case
Compatible Cameras Available at RAM
If you don't already have a compatible camera, here are two confirmed options:
- Raspberry Pi Camera Module V2 Official 8MP IMX219 — the official Sony sensor version, capable of 3280×2464 still images and 1080p30 video
- Raspberry Pi 3B/4B Camera Module 5MP Rev 1.3 — a lower-cost 5-megapixel alternative with the same board footprint
Frequently Asked Questions
Will this case fit the Raspberry Pi Camera Module V3?
It may fit, since V3 shares the same PCB size and mounting holes as V2 — but V3 is noticeably taller due to its autofocus motor, so the case may not close properly. Test the fit carefully before relying on it for a finished project.
Can I use this case with the HQ Camera or AI Camera?
The HQ Camera uses a completely different, larger board and won't fit. The AI Camera shares the V2/V3 board footprint but may run into the same height limitation as the V3.
Does the case block access to the camera's ribbon cable connector?
No, the case is designed as a shell around the board, so the ribbon cable connector remains accessible for connecting to your Raspberry Pi.
Is the camera module included with this case?
No, this listing is for the case only. A compatible V2 or 5MP camera must be purchased separately.
Is this an official Raspberry Pi product?
No, this is a third-party acrylic case. It's designed to fit official Raspberry Pi camera board dimensions but is not manufactured or endorsed by Raspberry Pi Holdings.
Looking for more camera options? Check out our full Raspberry Pi Camera Module Guide for a complete comparison, or browse the Audio, Sound & Camera Modules collection for everything else you need.